Kenrik KR1016PR, 16-Channel Passive Receiver
Overview
The Kenrik KR1016PR is a 16-channel passive (no power required) receiver that accepts real-time color or monochrome composite (CCTV) video over unshielded twisted pair (UTP) cable from any passive balun or UTP enabled camera up to 1,000 feet. The KR1016PR also allows up-the-coax data signals on the same twisted pair wire (up to 750 feet) and comes standard with surge protection.
Due to high-grade components the KR1016PR offers excellent interference rejection, allowing the signal to travel within telecom or network cabling systems. The KR1016PR is designed to provide a high quality, low cost alternative to coax when transmitting many camera signals under 1,000 feet. The KR1001PB also allows up-the-coax signals on the same twisted pair wire (up to 750 feet) and comes standard with surge protection.
Specifications
Video |
|
| Video Format | NTSC, PAL, SECAM |
| Frequency Response | 2 Hz to 6 MHz |
| Common Mode Rejection | 80dB nominal at power line frequency (50/60 Hz) Better than 60dB, DC to 5 MHz at any video input terminal pair |
| Transient Immunity | IEC 61000-4-2 (ESD) |
| Common Mode Range | 12 Vp-p |
| Wire Type | 100 Ohm, 24 AWG min Unshielded Twisted Pair |
| Wire Category | Cat 3 or better |
Mechanical |
|
Dimensions (HxWxL) |
19” x 1.75” x 1.5” |
| Unit Weight | 1.08 Lb, (.49kg) |
| Material | Industrial grade alluminum |
| Connectors | (16) UTP Video Inputs: Detachable Screw Terminal Blocks |
| Video Outputs | (16) Female BNC Connector to 75-Ohm Coax |
